Saltar al contenido
Simulator for electricians · REBT

Practise the trade without using up material

Consumer units, boxes, conduit and real measurements on the computer. Install, measure and find faults under the REBT, and keep your own projects.

For electricians, installers and anyone preparing on their own · Spain · 5 languages

For example, a flat with a floor plan in Voltaula Work
What you practise

Everything that happens on a job, on your computer

Voltaula is an interactive simulation platform for electrical installations, built for training and practice: equipment behaviour is physically computed, faults are diagnosed by measuring, and electricians train and keep their own projects.

For example, a consumer unit and boxes wired on a practice board
Realism

Built with workshop precision

Every part is drawn from its datasheet, and every action costs what it costs on a real job.

For example, wiring devices, boxes, a consumer unit and connectors

Real material

Wiring devices, boxes, consumer units and connectors drawn from the manufacturers' datasheets: terminals, dimensions and screws as on the real product.

0 V

Safety first

Isolate, lock off with a padlock and prove dead between L–N, L–PE and N–PE before touching anything.

For example, a voltage tester and multimeter

Measurements, not guesswork

The instruments respond like real ones, because they measure the computed circuit.

The electrician's tools and instruments

Tools of the trade

Each tool does what it does on site, and every action takes its time.

ITC

REBT rules

Every installation is checked against the REBT rules and their ITCs; every error carries its reference.

5

Five languages

Spanish, Valencian, English, Russian and Ukrainian, with translation of technical terms if you need it.

€

Every mistake costs

Material used and working time are counted as in a real quote.

No risk

Here a short circuit only trips the breaker.

No material wasted

Practise as often as you need: the cost is counted, but nobody pays it.

At your own pace

No timetable: Voltaula reopens your last attempt exactly as you left it.

Languages

The interface in one language, the terms in another too

Two independent settings: the interface language — any of the five — and, if you want, a translation of technical terms into any of the other four. Everyone works in the language they understand best and learns the electrical terminology in two languages: the one on screen and the one needed in the workshop, on site or in the documentation.

  1. Interface languageSpanish, Valencian, English, Russian or Ukrainian: tasks, menus and report in the language you choose.
  2. Term translationOptional: next to each technical term, in brackets, its name in any of the other four languages.
Who it is for
  • Electricians with crew members from other countries: each with the interface in their language and the terms in Spanish
  • Those who work in both Valencian and Spanish: the interface in one, the terms in the other
  • Anyone working outside Spain or with manufacturers' documentation: the terms in English too
Flat plan in Voltaula with the interface in English and terms in Spanish: hint for box B5
For example, interface in English with term translation into Spanish
Try it: the same plan hint
Language
Term translation
Box B5
Design: light point (punto de luz), circuit C1
Corridor, on the ceiling
Empty so far
Projects

Your own workshop, in free mode

In Voltaula Work you get a space of your own: draw the floor plan, place points and circuits, plug in the customer's appliances and save the project to carry on another day.

  • Free mode with the same editor as the tasks
  • Floor plan with rooms, walls and windows
  • Points with their height and circuit in every room
  • Project check against the REBT while you install
  • My attempts: everything you have done, with its report
Your own project in Voltaula Work with the project check
Customer appliances

The real load, just like at the customer's home

Customer appliances with real power and protection class. Plug them into your sockets and see how the installation responds.

  • Power is set within the real range for each type
  • The plug follows from the appliance's class and power
  • An appliance is unplugged and plugged back in, as on a real visit
For example, a fridge, washing machine, oven and heaters
Comparison

Practise without fear of breaking anything

How practising with Voltaula Work compares with the usual ways of learning and brushing up on the trade.

Real job
Videos and theory
Hours of practice
Whatever the job brings

You learn with the customer watching

None

You watch, but you don't install

As many as you like

At home, at any time

Material cost
High

A mistake is paid for in cable and switchgear

None

Nothing gets installed

None

But the cost is counted, as in a quote

Safety
Risky

The voltage is real

Complete

No risk and no practice

Complete

Simulated voltage: the mistake shows and is scored

Faults
When they happen

You don't choose which one you get

In theory

Explained, not searched for

Whenever you like

Hidden faults built in

Review
Nobody

The fault shows up later, on the job

Quiz

Theory questions

Automatic

Report to the REBT with every mistake and its ITC

Voltaula does not replace the real job: it helps you get there with the installation already practised.

Latest

What's new

What we have added in recent weeks.

All updates
  1. v0.9
    Work, manufacturer series and client appliances

    The Work edition, client appliances, explanations, twelve device series and new devices.

  2. v0.8
    Safety, faults and datasheets

    Safety checks as on site, new hidden faults and products drawn from datasheets.

  3. v0.7
    Your own projects

    Your flat or your board, with the design checked as you go.

Questions

Frequently asked questions

What electricians and installers usually ask us.

Another question? Write to us at info@voltaula.work

Write to us

No. Voltaula runs in the browser: all you need is a computer and an internet connection.

For electricians and installers who want to brush up, and for anyone preparing on their own. Vocational schools have their own edition, Voltaula Study.

The Spanish Low Voltage Electrotechnical Regulation (REBT, 2002) and its complementary technical instructions (ITC-BT). Every rule carries its reference: the clause of the regulation or good installation practice.

With your email: you receive an access link. If you have a password, you can use it instead.

Yes. Your projects and attempts are saved in your account, and Voltaula reopens your last attempt exactly as you left it.

Spanish, Valencian, English, Russian and Ukrainian. Technical terms can also be shown with their translation into another language.

It is used only so you can practise. You can ask us to export or delete your data by writing to info@voltaula.work.

For electricians

Start practising today

Log in with your email: we send you an access link. Nothing to install.

Try Voltaula Work
  • Works in the browser
  • Light and dark mode
  • Five languages